Network Portable IR Speed Dome Quick Start Guide
11
5.
Insert the SIM card tray with SIM card into SIM1 card slot.
6.
Insert the battery container into the cavity of the speed dome by the direction shown in
Figure 2-6.
Figure 2-5
Insert SIM Card Tray
Battery Container
Figure 2-6
Install Battery Container
7.
Press the four corners of the battery container until it is fixed.
Battery Container
Figure 2-7
Fix Battery Container
2.2
SD Card Installation
Two SD cards are supported for the speed dome with one card of 128 GB memory at
most, and you can insert another SD card for expansion.
Before you start:
Shut down the speed dome.
Steps:
1.
Hold the battery container between your fingers by the direction shown in Figure
2-8.
2.
Drag the battery container out by the direction shown in Figure 2-9.