HIKVISION DS-MDS003, Руководство пользователя, Страница: 15 / 27

DS-MDS003 Dock Station User Manual
UM DS-MDS003 042721NA 15
6. Optional: To upload files at a specific time, enable upload schedule and set Upload Time .
NOTE:
If upload schedule is disabled, the files will be uploaded to platform in real time.
7. Select OK .
Result
If platform connection succeeded, will appear on the upper right corner of the software page.
NOTE: If connection failed, check the platform parameters and network communication.
3.5. Manage Storage
3.5.1. Set Local Storage
You can edit and manage local storage.
Steps
1. Go to Configuration
→
Basic .
2. View local storage information, including
Total Space
,
Used Space
,
Free Space
, and
Usage
.
3. Set Total Free Space and Clear Space .
CAUTION: The earliest data will be cleared according to time. Back up data in time to avoid data
loss.
Example: If you set Total Free Space as 10 GB, and set Clear Space as 5 GB, when the storage disk free
space is less than or equal to 10 GB, 5 GB storage space will be cleared automatically.
4. Optional: After uploading the body camera data to the software, the data will be cleared automatically.
If you do not want to clear the data automatically, disable Clear Body Camera Data .
5. Select OK to save the settings.
3.5.2. Connect to Storage Server
The storage server can store body camera files as expansion storage.
Before You Start
•
Allocate the storage server.
• The software communicates normally with the storage server.
Steps
1. Go to the
Configuration → Storage
.
2. Select Storage Type according to server type.
3. Enter server parameters, including
IP Address
,
Port No.
, etc.