HIKVISION DS-MDH005-B, Руководство пользователя, Страница: 12 / 20

Set IP address
manually
a. Click IP Address.
b. Edit the IP address, gateway, and subnet mask according to the IP
address network segment of the face detection camera.
c. Click CONNECT.
DHCP If the device has been connected to the network which can get the IP
address automatically via the network cable, you can select Ethernet Mode
as Dynamic Acquisition to get the IP address automatically.
3.1.2 Dial
Set the dialing parameters if you want to connect the device to the network via SIM card.
Before You Start
Install SIM card.
Steps
1. Tap Network Settings → Dial-up Settings .
Figure 3-2 Set Dial-up Parameters
2. Check Enable Dial-up.
Smart Onboard Temperature Screening Terminal User Manual
6