manualshive.com logo in svg

HIKVISION DS-KD8003-IME2, Руководство по настройке, Страница: 43 / 51

Поделиться
Скачать
HIKVISION DS-KD8003-IME2 Скачать руководство пользователя страница 43

2 Video Intercom Operation

2.1 Video Intercom Operation via Device

2.1.1 Call Resident

Note

•

Make sure you have configured the room No. of the device.

•

Make sure you have add contacts to the device via iVMS-4200 Client Software.

You can call corresponding resident in three ways:

•

Press the call button on the main unit or on the nametag unit.

•

Enter the Room No. on the keypad module, and press # to start calling.

Note

You can press * to hang up.

•

Press ˄ or ˅ on the display module to enter the contact list. Select contact . Press

OK and confirm to call.

2.1.2 Issue Card

Before You Start

Make sure you have issue the card locally or remotely. See Person Management for

issuing card via Client software for details.
Issue Card via Main Card: You can swipe card to issue it after swiping the main card

in advance.
Steps
1. Swipe the main card on the card reading area, and hear two beeps.
2. Swipe the unauthorized sub cards in turn after hearing a beep.
3. Swipe the main card again to end the card issuing process.

Note

•

DS-KD-M supports Mifare card, DS-KD-E supports EM card.

•

If the amout of sub cards exceeds 2500, no more sub card can be issued.

Module Door Station Configuration Guide

35

Содержание DS-KD8003-IME2




















































Отзывы:

Нет отзывов