HIKVISION DS-KAD312, Руководство пользователя

Страница: 26 / 43

19
5 DIP Settings
Figure 5-1 DIP Switches of DS-KAD312
Table 5-1 Descriptions of RW1 and RW2
Digit
(RW1)
1 2 3 4 5 6 7 8
Function
(RW1)
Floors Floors Reserved Room
No.
Room
No.
Room
No.
Reserved Mode
Digit
(RW2)
1 2 3 4 5 6 7 8
Function
(RW2)
Floors Floors Floors Floors Floors Floors Floors Floors

The DIP switch (RW1) is used to configure the DIP rules. Digit 8 (RW1) is used to
control the mode.

Before configure the device, set Digit 8 (RW1) as ON to adapt to the current indoor
station version.

The DIP switch (RW2) is used to configure the start floor No..
5.1 Configure RW 1
RW 1 Configuration for Single Distributor
When there is only one distributor in the system, configure the Digit 1, Digit 2 and Digit3
of RW1 to define the floor number.
Table 5-2 RW1 Configuration for Single Distributor