Note
Make sure the device has connected to a network.
If enable DHCP, the system will assign the IP address and other parameters automatically.
If disable DHCP, you should set the IP address, the subnet mask, and the gateway.
Wi-Fi
Select a Wi-Fi and enter the Wi-Fi's password to get connected.
Or tap Add Wi-Fi and enter the Wi-Fi's name and the password to get connected.
3. Optional: Tap Skip to skip network settings.
6.4 Set Administrator
After device activation, you can add an administrator to manage the device parameters.
Before You Start
Activate the device and select an application mode.
Steps
1. Optional: Tap Skip to skip adding administrator if required.
2. Enter the administrator's name (optional) and tap Next.
DS-K5604A-3XF Series Face Recognition Terminal User Manual
17
