Face Recognition Terminal
·
Quick Start Guide
8
Chapter 5
Device Activation
Purpose:
You are required to activate the device first before using it.
Activation via device, activation via SADP, and activation via client software are supported.
The default values of the control terminal are as follows.
The default IP address: 192.0.0.64
The default port No.: 8000
The default user name: admin
5.1
Activating via Device
If the device is note activated yet, it will pop up an activation page after powering on.
Steps:
1.
Create a password for the admin user.
2.
Confirm the password.
3.
Tap
Activate
.
STRONG PASSWORD RECOMMENDED
– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case
letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.
5.2
Activating via SADP Software
Purpose:
SADP software is used for detecting the online device, activating the device, and resetting the
