HIKVISION DS-K3B802X Series Скачать руководство пользователя страница 73

Страница: 73 / 147

8.2.1 Add Device

The client also supports importing multiple devices in a batch when there are large amount of

devices to be added.

Add Online Device

The active online devices in the same local subnet with the client software will be displayed on the

Online Device area. You can click Refresh Every 60s to refresh the information of the online

devices.

Add Single or Multiple Online Devices

The client can detect online devices which are in the same network as the PC running the client.

You can select a detected online device displayed in the online device list and add it to the client.

For detected online devices sharing the same user name and password, you can add them to the

client in a batch.
Before You Start

●

The device(s) to be added are in the same network as the PC running the client.

●

The device(s) to be added have been activated.

Steps
1. Click Online Device to show the online device area.

The searched online devices are displayed in the list.

Figure 8-2 Online Device

2. In the Online Device area, check one or more online device(s), and click Add to open the device

adding window.

DS-K3B802X Series Swing Barrier User Manual

Содержание DS-K3B802X Series




















































































































































Результаты поиска

Содержание DS-K3B802X Series

Отзывы:

HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 73 / 147

Результаты поиска

Содержание DS-K3B802X Series

Отзывы: