HIKVISION DS-K3B601S Series Скачать руководство пользователя

Страница: 74 / 124

3. Select the person to move.

4. Click Change Organization.

5. Select the organization to move persons to.

6. Click OK.

7.4.20 Issue Cards to Persons in Batch

The client provides a convenient way to issue cards to multiple persons in a batch.
Steps

1. Enter Person module.

2. Click Batch Issue Cards.

All the added persons with no card issued will be displayed in the right panel.

3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need

issuing cards.

4. Optional: Click Settings to set the card issuing parameters. For details, refer to Issue a Card by

Local Mode .

5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing

cards.

6. Click the Card No. column and enter the card number.

Place the card on the card enrollment station.

Swipe the card on the card reader.

Manually enter the card number and press the Enter key.

The person(s) in the list will be issued with card(s).

7.4.21 Report Card Loss

If the person lost his/her card, you can report the card loss so that the card's related access

authorization will be inactive.
Steps

1. Enter Person module.

2. Select the person you want to report card loss for and click Edit to open the Edit Person

window.

3. In the Credential → Card panel, click on the added card to set this card as lost card.

After reporting card loss, the access authorization of this card will be invalid and inactive. Other

person who gets this card cannot access the doors by swiping this lost card.

4. Optional: If the lost card is found, you can click to cancel the loss.

After cancelling card loss, the access authorization of the person will be valid and active.

5. If the lost card is added in one access group and the access group is applied to the device

already, after reporting card loss or cancelling card loss, a window will pop up to notify you to

DS-K3B601SX Series Swing Barrier User Manual

Содержание DS-K3B601S Series





























































































































Результаты поиска

Содержание DS-K3B601S Series

Отзывы:

Похожие инструкции для DS-K3B601S Series

Бренды по названию

Популярные бренды

HIKVISION DS-K3B601S Series, Руководство пользователя

Результаты поиска

Содержание DS-K3B601S Series

Отзывы:

Похожие инструкции для DS-K3B601S Series

Бренды по названию

Популярные бренды