HIKVISION DS-K3B501S Series Скачать руководство пользователя

Страница: 70 / 116

4) Optional: Select a selected holiday in the right list and click to remove the selected one,

or click Clear to clear all the selected holiday(s) in the right list.

7. Click Save to save the settings and finish adding the template.

6.6 Set Access Group to Assign Access Authorization to Persons

After adding the person and configuring the person's credentials, you can create the access groups

to define which person(s) can get access to which door(s) and then apply the access group to the

access control device to take effect.
Steps
When the access group settings are changed, you need to apply the access groups to the devices

again to take effect. The access group changes include changes of template, access group settings,

person's access group settings, and related person details (including card number, fingerprint, face

picture, linkage between card number and fingerprint, linkage between card number and

fingerprint, card password, card effective period, etc).
1. Click Access Control → Authorization → Access Group to enter the Access Group interface.

2. Click Add to open the Add window.

3. In the Name text field, create a name for the access group as you want.

4. Select a template for the access group.

Note

You should configure the template before access group settings. Refer to Configure Schedule

and Template for details.

5. In the left list of the Select Person field, select person(s) to assign access authority.

6. In the left list of the Select Access Point field, select door(s), door station(s) or floor(s) for the

selected persons to access.

7. Click Save.

You can view the selected person(s) and the selected access point(s) on the right side of the

interface.

DS-K3B501S Series Swing Barrier User Manual

Содержание DS-K3B501S Series





















































































































Результаты поиска

Содержание DS-K3B501S Series

Отзывы:

Похожие инструкции для DS-K3B501S Series

Бренды по названию

Популярные бренды

HIKVISION DS-K3B501S Series, Руководство пользователя

Результаты поиска

Содержание DS-K3B501S Series

Отзывы:

Похожие инструкции для DS-K3B501S Series

Бренды по названию

Популярные бренды