HIKVISION DS-K3B220X Series, Руководство пользователя, Страница: 58 / 115

-
If you choose Linkage Type as Employee ID Linkage, you need to enter the employee ID and
select the card reader.
3. Set linked action.
Linked Buzzer
Enable Linked Buzzer and select Start Buzzing or Stop Buzzing for the target event.
Linked Door
Enable Linked Door, check Door 1 or Door 2, and set the door status for the target event.
Linked Alarm Output
Enable Linked Alarm Output, check Alarm Output 1 or Alarm Output 2, and set the alarm
output status for the target event.
6.5.9 Access Control Settings
Set Authentication Parameters
Click Configuration → Access Control → Authentication Settings .
Note
The functions vary according to different models. Refers to the actual device for details.
Figure 6-8 Set Authentication Parameters
Click Save to save the settings after the configuration.
DS-K3B220X Series Swing Barrier User Manual
46