Title:
How to Initial Access Controller
Version:
v1.0
Date:
7/19/2017
Product:
Access Control Device
Page:
1 of 3
How to Initial Access Controller
Preparation
In this document, the access controller includes DS-
K2600 series and DS-K2800 series access controllers.
Notice
1.
Please make sure access controllers are powered on before initializing the hardware;
2.
Initializing the hardware will restore device to factory, and all parameters what you set will be erased;
3.
After initializing, please activate access controllers again by setting a new strong password;
4.
For DS-K2600 series access controllers the initial jumper is in the same position, please find it in
access controller mainboard as following pictures:
5.
For DS-K2800 series access controllers the initial jumper is in the same position, please find it in
access controller mainboard as following pictures:
Normal Status
Initial Status