HIKVISION DS-K2600-G Series, Руководство пользователя

Страница: 59 / 125

Access Controller
·
User Manual
50
Note: The interface may different from the picture displayed above. Refer to the actual interface
when adopting this function.
Door Status : The status of the connected door.
Host Status : The status of the host, including Storage Battery Power Voltage, Device Power Supply
Status, Multi-door Interlocking Status, Anti-passing Back Status, and Host Anti-Tamper Status.
Card Reader Status : The status of card reader.
Note: If you use the card reader with RS-485 connection, you can view the status of online or
offline. If you use the card reader with Wiegand connection, you can view the status of offline.
Alarm Input Status : The alarm input status of each port.
Alarm Output Status : The alarm output status of each port.
Event Sensor Status : The event sensor status of each port.
Secure Door Control Unit Status: The online status and tamper status of the Secure Door Control
Unit.
Arming Status: The status of the device.
7.4.3 Editing Basic Information
Purpose:
After adding the access control device, you can edit the device basic information.
Steps:
1. Select the device in the device list.
2. Click Modify to pop up the modifying device information window.
3. Click Basic Information tab to enter the Basic Information interface.