manualshive.com logo in svg

HIKVISION DS-K1T643 Series, Руководство пользователя, Страница: 87 / 144

Поделиться
Скачать
HIKVISION DS-K1T643 Series Скачать руководство пользователя страница 87

Note

If you select 5.0 as the version, you should set the ISUP key as well.

5. Click Save.

Configure HTTP Listening

The device can send alarm information to the destination IP or host via HTTP protocol/HTTPS

protocol.
Before You Start

The destination IP or host name should support the HTTP protocol/HTTPS protocol to receive the

alarm information.

Note

The function should be supported by the device.

Steps

1. Click Configuration → Network → Advanced → HTTP Listening .

2. Edit the destination IP or host name, URL and port.

3. Optional: Click Test to test whether the entered IP address or host name are valid.

4. Optional: Click Default to reset the destination IP or host name.

5. Click Save.

8.5.13 Set Video and Audio Parameters

Set the image quality, resolution, and the device volume.

Set Video Parameters

Click Configuration → Video/Audio → Video .

DS-K1T643 Series Face Recognition Terminal User Manual

72

Содержание DS-K1T643 Series

















































































































































Отзывы:

Нет отзывов