HIKVISION DS-K1T643 Series Скачать руководство пользователя страница 73

Страница: 73 / 144

7.12.4 Call Room from Device

Steps

1. Get the client software from the supplied disk or the official website, and install the software

according to the prompts.

2. Run the client software and the control panel of the software pops up.

3. Click Device Management to enter the Device Management interface.

4. Add the indoor station and the device to the client software.

Note

For details about adding device, see Add Device.

5. Link a user to an indoor station and set a room No. for the indoor station.

6. Tap on the authentication page of the device. Enter the room No. on the dial page and tap

to call the room.

7. After the indoor station answers the call, you can start two-way audio with the indoor station.

7.12.5 Call Mobile Client from Device

Steps

1. Get the mobile mobile client from the supplied disk or the official website, and install the

software according to the prompts.

2. Run the mobile client and add the device to the mobile client.

Note

For details, see the user manual of the mobile client.

3. Enter Basic Settings → Shortcut Key and enable Call APP.

4. Go back to the initial page and call the mobile client.

1) Tap on the device initial page.

2) Tap to call the mobile client.

DS-K1T643 Series Face Recognition Terminal User Manual

Содержание DS-K1T643 Series

















































































































































Результаты поиска

Содержание DS-K1T643 Series

Отзывы:

HIKVISION DS-K1T643 Series, Руководство пользователя, Страница: 73 / 144

Результаты поиска

Содержание DS-K1T643 Series

Отзывы: