HIKVISION DS-K1T605 Series, Руководство пользователя

Страница: 79 / 107

6. Click Save to save the settings.
9.5 Configure Linkage Actions for Access
Control
The events triggered by the access control devices, doors, card
readers, and alarm inputs, as well as the card swiping of persons,
mobile terminal's MAC address detected, and employee No.
detected, can trigger a series of linkage actions to notify the
security personnel and record the events.
Two types of linkage actions are supported: client actions and
device actions.
• Client Actions: When the event is detected, it will trigger the
actions on the client, such as the client playing alarm sound
and sending an email to notify the security personnel.
• Device Actions: When the event is detected, it will trigger the
actions of this device, such as buzzing, door open/closed, audio
play, etc., to notify the security personnel and allow/forbid
access.
9.5.1 Configure Client Actions for Access Event
You can assign client linkage actions to the event by setting up a
rule. For example, when the event is detected, an audible
warning appears to notify the security personnel.
Steps
Note
The linkage actions here refer to the linkage of the client
software's own actions such as audible warning, email linkage,
etc.
1. Click Event Management Access Control Event .
The added access control devices will display in the device list.
2. Select a resource (including device, alarm input, door/elevator,
and card reader) from the device list.
The event types which the selected resource supports will
display.
3. Select the event(s) and click Edit Priority to define the priority
for the event(s), which can be used to filter events in the Event
Center.
4. Set the linkage actions of the event.
1) Select the event(s) and click Edit Linkage to set the client
actions when the events triggered.
Audible Warning
The client software gives an audible warning when alarm
is triggered. You can select the alarm sound for audible
warning.
Note
For setting the alarm sound, please refer to .
Email Linkage
Send an email notification of the alarm information to one
or more receivers.
2) Click OK.
70