HIKVISION DS-K1T105 Series Скачать руководство пользователя

Страница: 95 / 99

Access Control Terminal

User Manual

Select the operation type as Access Control Logs.

Click the icon

to specify the start time and end time.

Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.

Note:

Please narrow the search condition if there are too many log files.

Log Search

Purpose:

The Log Search of the Access Control System includes information for configuration log files and control log files.

Steps:

Open the Log Search page.

Select the radio button of Control Logs.

Select the operation type as Log Search.

Click the icon

to specify the start time and end time.

Click Search. The matched log files will display on the list.
You can check the operation time, log type and other information of the logs.

Note:

Please narrow the search condition if there are too many log files.

7.5.2

System Configuration

Interface Introduction

Purpose:

The general parameters, Auto Time Adjustment and Card Reader of the Access Control System can be configured.

Click the

icon on the control panel to open the System Configuration page.

Auto Time Synchronization

The Auto Time Synchronization of the Access Control System can operate auto time adjustment to all access control devices of the
Access Control System according to specified period and time.

Card Reader Configuration

The Card Reader Configuration is for Access Control System to read the card by setting Card Reader parameters.

Fingerprint Machine

The Fingerprint Machine is for Access Control system to collect fingerprints.

Note:

Содержание DS-K1T105 Series




































































































Результаты поиска

Содержание DS-K1T105 Series

Отзывы:

Похожие инструкции для DS-K1T105 Series

Бренды по названию

Популярные бренды

HIKVISION DS-K1T105 Series, Руководство пользователя

Результаты поиска

Содержание DS-K1T105 Series

Отзывы:

Похожие инструкции для DS-K1T105 Series

Бренды по названию

Популярные бренды