Note
• If the server is inaccessible, go to Internet Options → Advancement , check Enable TLS1.1
and Enable TLS1.2.
• The specific interface depends on the product.
After admin user logs in, the server will jump to the homepage where you can view information
such as Alarm Statistics, Camera Statistics, and Capture Statistics.
2.2 Create Cluster
Note
The nodes that create micro video cloud cluster should be same with that of creating analysis
cluster. Otherwise, exception may occur.
2.2.1 Add Nodes
Before You Start
The node is online and on the same subnet with the server.
Note
The specific parameter values filled in the relevant interfaces below are for reference only. You
need to configure relevant parameter values according to actual needs.
Steps
1. Go to System Management → Cluster Management → Node Management
2. Click Add.
Figure 2-3 Add Notes
3. Enter Name, Nodes IP, User Name and Password.
4. Click OK.
Intelligent Fusion Server User Manual
3
