LCD Monitor User Manual
31
Update
Insert the USB disk which contains update program in the screen’s back panel. Click
Maintenance
to enter
the maintenance interface. Select the screen you want to update and click
Update
to finish the screen
update.
Recover User Parameters
Select a screen needs to be recovered, and click
Recover
User Parameters
to complete the settings.
The device then reboots automatically. All the parameters except the serial number are recovered to the
default.
3.6.3
Edge Blanking
Purpose:
Click
Edge Blanking
to enter the configuration page. The edge of the image is shielded after configuring the
horizontal and vertical size of the image.
Steps:
1.
Select a screen needs to be configured.
2.
Check the
Enable
check box to enable the edge blanking.
3.
Input the required horizontal and vertical size of the margin you want to shield.
4.
Click
Set
to complete the settings.
Figure 3. 36
Edge Blanking Interface
