HIKVISION DS-C12A, Руководство пользователя, Страница: 39 / 43

2. Click System → Log Query .
3. Set the Search Mode. Major Type, Minor Type, Start Time, and End Time are available.
4. Click Search to search logs. Click Backup to back up the logs as needed.
5.9 Restore Default Parameters
You can restore your device to factory default settings as needed, for example, when your device
encounters a fault that is difficult to resolve.
Steps
1. Click Maintenance and Management → Device Management , select the desired device in the
list and click Remote Configuration on the Operation column.
2. Click System → System Maintenance .
3. Restore partial default parameters or all default parameters by clicking Restore Default Settings
or Restore All.
Caution
• Clicking Restore Default Settings will restore all parameters to factory settings except IP
configuration.
• Click Restore All will clear all parameters and restore the parameters to factory settings.
• You are recommended to export the configuration file first before restoring parameters.
5.10 Restart a Device Remotely
You can restart your device remotely on the client for troubleshooting.
Steps
1. Click Maintenance and Management → Device Management , select the desired device in the
list and click Remote Configuration on the Operation column.
2. Click System → System Maintenance .
3. Click Reboot.
5.11 Upgrade a Device Remotely
You can upgrade your device remotely on the client.
Steps
1. Click Maintenance and Management → Device Management , select the desired device in the
list and click Remote Configuration on the Operation column.
2. Click System → System Maintenance .
3. In the Remote Upgradearea, select and import the upgrade file and click Upgrade.
Video Wall Controller User Manual
30