HIKVISION DS-C12A, Руководство пользователя

Страница: 35 / 43

Chapter 5 Device Configuration and Maintenance
You can perform device configuration and maintenance operations on the client, such as
configuring device time and security services, changing the device password, searching and
backing up operation logs, remotely restarting or upgrading devices, and restoring factory default
settings.
5.1 Configure the Device Name and Device No.
A device name or device No. identifies a device from other devices. You can customize the name or
No. as needed.
Steps
1. Click Maintenance and Management → Device Management , select the desired device in the
list and click Remote Configuration on the Operation column.
2. Click System → General .
3. Change the Device Name or Device No. as needed.
4. Click Save.
5.2 Configure Device Time
If your device time is incorrect, set the time zone or manually synchronize time to correct the time.
Steps
1. Click Maintenance and Management → Device Management , select the desired device in the
list and click Remote Configuration on the Operation column.
2. Click System → Time .
Figure 5-1 Configure Device Time
3. Select a time zone where your device is located.
4. Optional: To synchronize your device with other devices on the same network, enable NTP and
configure Server Address, NTP Port, and Synchronization Interval.
Video Wall Controller User Manual
26