HIKVISION DS-9608NI-I8 Скачать руководство пользователя страница 43

Страница: 43 / 243

User Manual of Network Video Recorder User Manual

Common Menu

Quick access to the sub-menus which you frequently visit.

Menu

Enter the main menu of the system by right clicking the mouse.

Single Screen

Switch to the single full screen by choosing channel number from the dropdown

list.

Multi-screen

Adjust the screen layout by choosing from the dropdown list.

Previous Screen

Switch to the previous screen.

Next Screen

Switch to the next screen.

Start/Stop Auto-switch

Enable/disable the auto-switch of the screens.

Start Recording

Start continuous recording or motion detection recording of all channels.

Add IP Camera

Enter the IP Camera Management interface, and manage the cameras.

Playback

Enter the playback interface and start playing back the video of the selected

channel immediately.

PTZ

Enter the PTZ control interface.

Output Mode

Four modes of output supported, including Standard, Bright, Gentle and Vivid.

Aux Monitor

Switch to the auxiliary output mode and the operation for the main output is

disabled.



The

dwell time

of the live view configuration must be set before using

Start Auto-switch



If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled; you

need to switch back to the Main output with the MAIN/AUX button on the front panel or remote.



If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when

right-clicking mouse on this camera.

Figure 3. 1

Right-click Menu

Содержание DS-9608NI-I8




















































































































































































































































Результаты поиска

Содержание DS-9608NI-I8

Отзывы:

HIKVISION DS-9608NI-I8, Руководство пользователя, Страница: 43 / 243

Результаты поиска

Содержание DS-9608NI-I8

Отзывы: