HIKVISION DS-9608NI-I8 Скачать руководство пользователя страница 141

Страница: 141 / 243

User Manual of Network Video Recorder User Manual

140

With the configured VCA detection, the NVR supports the VCA search for the behavior analysis, face capture,
people counting and heat map results.

10.1

Face Search

Purpose:

When there are detected face picture captured and saved in HDD, you can enter the Face Search interface to search

the picture and play the picture related video file according to the specified conditions.

Before you start:

Please refer to

Section 9.2

错误

未找到引用源。

for configuring the face detection.

Steps:

Enter the

Face Search

interface.

Menu >VCA Search > Face Search

Select the camera (s) for the face search.

Figure 10. 1

Face Search

Specify the start time and end time for search the captured face pictures or video files.

Click

Search

to start searching. The search results of face detection pictures are displayed in list or in chart.

Содержание DS-9608NI-I8




















































































































































































































































Результаты поиска

Содержание DS-9608NI-I8

Отзывы:

HIKVISION DS-9608NI-I8, Руководство пользователя, Страница: 141 / 243

Результаты поиска

Содержание DS-9608NI-I8

Отзывы: