HIKVISION DS-96000NI-I24 Скачать руководство пользователя страница 156

Страница: 156 / 241

Network Video Recorder User Manual

155

Figure 11. 14

More Settings Interface

Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.



Alarm Host IP/Port

: With a remote alarm host configured, the device will send the alarm event or

exception message to the host when an alarm is triggered. The remote alarm host must have the CMS

(Client Management System) software installed.

The

Alarm Host IP

refers to the IP address of the remote PC on which the CMS (Client Management

System) software (e.g., iVMS-4200) is installed, and the

Alarm Host Port

must be the same as the

alarm monitoring port configured in the software (default port is 7200).



Multicast IP

: The multicast can be configured to realize live view for more than the maximum number

of cameras through network. A multicast address spans the Class-D IP range of 224.0.0.0 to

239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to

239.255.255.255.

When adding a device to the CMS (Client Management System) software, the multicast address must

be the same as the device’s multicast IP.



RTSP Port

: The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use

in entertainment and communications systems to control streaming media servers.

Enter the RTSP port in the text field of

RTSP Port

. The default RTSP port is 554, and you can change

it according to different requirements.



Server Port

and

HTTP Port

: Enter the

Server Port

and

HTTP Port

in the text fields. The default

Server Port is 8000 and the HTTP Port is 80, and you can change them according to different

requirements.

The Server Port should be set to the range of 2000-65535 and it is used for remote client software

access. The HTTP port is used for remote IE access.

Figure 11. 15

Configure More Settings

Click the

Apply

button to save and exit the interface.

11.2.5

Configuring HTTPS Port

Purpose:

HTTPS provides authentication of the web site and associated web server that one is communicating with, which

protects against Man-in-the-middle attacks. Perform the following steps to set the port number of https.

Содержание DS-96000NI-I24


















































































































































































































































Результаты поиска

Содержание DS-96000NI-I24

Отзывы:

HIKVISION DS-96000NI-I24, Руководство пользователя, Страница: 156 / 241

Результаты поиска

Содержание DS-96000NI-I24

Отзывы: