HIKVISION DS-96000NI-I24 Скачать руководство пользователя страница 137

Страница: 137 / 241

Network Video Recorder User Manual

136



Please refer to the

Chapter 9.4 Intrusion Detection

for operating steps to configure the fast moving detection.



The

Sensitivity

in the Rule Settings defines the moving speed of the object which can trigger the alarm. The

higher the value is, the more easily a moving object can trigger the alarm.



Up to 4 rules can be configured.

9.10

Parking Detection

Purpose:

Parking detection function detects illegal parking in places such as highway, one-way street, etc., and a series of

actions can be taken when the alarm is triggered.



Please refer to the

Chapter 9.4 Intrusion Detection

for operating steps to configure the parking detection.



The

Threshold

[5s-20s] in the Rule Settings defines the time of the vehicle parking in the region. If you set

the value as 10, alarm is triggered after the vehicle stay in the region for 10s.



Up to 4 rules can be configured.

9.11

Unattended Baggage Detection

Purpose:

Unattended baggage detection function detects the objects left over in the pre-defined region such as the baggage,

purse, dangerous materials, etc., and a series of actions can be taken when the alarm is triggered.



Please refer to the

Chapter 9.4 Intrusion Detection

for operating steps to configure the unattended baggage

detection.



The

Threshold

[5s-20s] in the Rule Settings defines the time of the objects left over in the region. If you set

the value as 10, alarm is triggered after the object is left and stay in the region for 10s. And the

Sensitivity

defines the similarity degree of the background image. Usually, when the sensitivity is high, a very small

object left in the region can trigger the alarm.



Up to 4 rules can be configured.

9.12

Object Removal Detection

Purpose:

Object removal detection function detects the objects removed from the pre-defined region, such as the exhibits on

display, and a series of actions can be taken when the alarm is triggered.



Please refer to the

Chapter 9.4 Intrusion Detection

for operating steps to configure the object removal

Содержание DS-96000NI-I24


















































































































































































































































Результаты поиска

Содержание DS-96000NI-I24

Отзывы:

HIKVISION DS-96000NI-I24, Руководство пользователя, Страница: 137 / 241

Результаты поиска

Содержание DS-96000NI-I24

Отзывы: