HIKVISION DS-9500 Series NVR Скачать руководство пользователя страница 56

Страница: 56 / 76

User Manual of DS-9500 Series NVR

9.5.6 E-Mail Settings

Through E-mail configuration, the e-mail can be sent to the designated mailbox when there is an alarm.

9.6 HDD Settings

Select



If server authentication is needed, enable it (i.e.

) and input

user name and password.
Input the sender and recipient information, if it needs to send
picture, you can enable “Attachment” (i.e.

Note:

Currently the function of captured picture attachment

is invalid for DS-9500.

Select



Input the IP address of NAS or IP SAN server in the blank
“Server IP address”; input the saving path allocated by NAS
or IP SAN server in the blank “File Path”.

Note:

Make sure that the device supports NFS function and
NAS or IP SAN server allocated the storage space
correctly.

Up to 1 IP SAN server is allowable to be used.

HDD Formatting:

Click

Note:

Please backup the data before formatting hard disk.

Содержание DS-9500 Series NVR













































































Результаты поиска

Содержание DS-9500 Series NVR

Отзывы:

HIKVISION DS-9500 Series NVR, Руководство пользователя, Страница: 56 / 76

Результаты поиска

Содержание DS-9500 Series NVR

Отзывы: