HIKVISION DS-9500 Series NVR Скачать руководство пользователя страница 26

Страница: 26 / 76

User Manual of DS-9500 Series NVR

5.1.4 Stop Preview

5.2 Recording and Image Capturing

The channel for recording and image capturing image should be in the preview mode.

Note:

When the preview of the current channel is stopped, the recording of this channel will be stopped as well.

5.2.1 Recording

Note:

If saving file disk space is less than 500M, the web server will stop recording automatically.

Click

on the playlist, it will become

. This

can stop the channel preview.

Click

to stop all channels preview.

Click “Config”, enter local configuration menu
where can change the directory of saving recording
file and the size of file packing.

Click

button on playlist to start recording of this

channel, if the icon is not

, it will note “Recording

failed”.

Click

icon again to stop recording, and the saving

file folder will pop up automatically.

When multiple channels are under previewing, user may

click

to start all channel recording, or click

stop all channel recording.

Stop previewing will also stop recording of this
channel.

Содержание DS-9500 Series NVR













































































Результаты поиска

Содержание DS-9500 Series NVR

Отзывы:

HIKVISION DS-9500 Series NVR, Руководство пользователя, Страница: 26 / 76

Результаты поиска

Содержание DS-9500 Series NVR

Отзывы: