HIKVISION DS-9500 Series NVR, Руководство пользователя, Страница: 16 / 76

User Manual of DS-9500 Series NVR
13
DS-9500 Series NVR is mainly used with IPC, DVS network video storage and playback. Network configurations
are needed before operating, including: IP address, subnet mask, gateway and port.
Note:
The factory default username is admin, password is 12345.
The factory default IP address of DS-9500 series NVR is 192.168.0.1.
2.1 Hyper Terminal Setup
The common method is to connect NVR and PC with serial line, run Hyper Terminal and modify parameters with
serial command. Please connect the RS-232 port of NVR with the COM port of PC directly, power on the NVR
and PC and follow the steps:
Step 1: Enter Hyper Terminal.
Click “Start”-> “Programs” -> “Accessories” -> “Communications” -> “Hyper Terminal” in Windows system, and
the dialogue box below will appears as Figure 2.1.1.
Figure 2.1.1
Step 2: Name the connection and define the icon.
Input a name (e.g. HK), select an icon, and press “OK” to enter “Connect To” dialogue box.
Step 3: Select the communication port.
Select “COM1” in “Connect To” inter face (Please select the COM port according to the reality, in case PC has
more than 1 COM.) Press “OK” to enter “Properties” dialogue box.
Figure 2.1.2
Step 4: Serial port setup.