HIKVISION DS-9100HFI-ST Скачать руководство пользователя страница 132

Страница: 132 / 200

User Manual of DS-9100HFI-ST Series DVR

131

8.6 Setting Alarm Response Actions

Purpose:

Take alarm response actions will be activated when an alarm or exception occurs, including Full Screen

Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Upload Picture to FTP, Trigger Alarm

Output and Send Email.

Full Screen Monitoring

When an alarm is triggered, the local monitor (VGA or BNC monitor) display in full screen the video image

from the alarming channel configured for full screen monitoring.

If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an

interval of 10 seconds (default dwell time). A different dwell time can be set by going to Manu >

Configuration >Live View> Alarm Picture Dwell Time.

Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.

Note:

You must select during “Trigger Channel” settings the channel(s) you want to make full screen

monitoring.

Audible Warning

Trigger an audible

beep

when an alarm is detected.

Notify Surveillance Center

Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC

installed with Remote Client.

Note:

The alarm signal will be transmitted automatically at detection mode when remote alarm host is

configured. Please refer to

Chapter 9.2.6

for details of alarm host configuration.

Upload Captured Pictures to FTP

Capture the image when an alarm is triggered and upload the picture to a FTP server.

Note:

Please set up FTP address and the remote FTP server first.

Email Linkage

Send an email with alarm information to a user or users when an alarm is detected.

Please refer to

Chapter 9.2.10

for details of Email configuration.

Содержание DS-9100HFI-ST









































































































































































































Результаты поиска

Содержание DS-9100HFI-ST

Отзывы:

Похожие инструкции для DS-9100HFI-ST

Бренды по названию

Популярные бренды

HIKVISION DS-9100HFI-ST, Руководство пользователя

Результаты поиска

Содержание DS-9100HFI-ST

Отзывы:

Похожие инструкции для DS-9100HFI-ST

Бренды по названию

Популярные бренды