First Choice For Security Professionals
6. Recording
To setup recording schedule:
You can set the recording through two ways:
OPTION1:
Right click to access the menu. Select
Start Recording
from
the list, select either
Continuous Record
or
Event Record
.
This will apply a 24/7 recording for all active channels.
OPTION2:
1. Enter the
Schedule Configuration
menu by going
to
Main Menu
>
Recording Configuration
>
Schedule.
2. Select a camera to configure from the camera
drop down menu.
3. Check the
Enable Schedule
checkbox to enable the recording schedule. If the checkbox is
unchecked, the recording schedule will be disabled.
4. Click blue
Continuous
or yellow
Event
icon below time table to select recording type. The
time table will switch to editable mode, drag mouse over time table to configure recording
schedule. Different recording types will be marked with corresponding color.
Note: Step 4 scheduling adjustments made to the hour, if recording schedule requires
adjustments to the minutes, move to Step 7.
5. Select Recording Type for each day of the week.
Recording type
includes
Continuous
for
continuous recording or
Event
for recording when an event is triggered (i.e. from detected
motion) for the selected time period.
6. Select the start and stop time for each day of the week. The start and stop time are listed
using a 24 hr cycle (i.e. 18:00 is equivalent to 6:00pm)
7. Select the
Apply
button to save the schedule settings and click to return to the
previous menu. Clicking without clicking
Apply
will go out of the menu without saving
settings.
NOTE: Event recordings are recordings that are triggered from motion detection
and/or from an external alarm.
www.hikvision.com