HYBRID DVR/NVR/ANALOG
10. Adding IP Cameras
Adding IP Cameras
Directly on the Hybrid DVR and NVR’s Menu:
1. Enter the Add/Remove Cameras menu by going to
Main Menu > Cameras Setup > Cameras.
2. Select the
IP Camera
tab.
3. Click the
Search
button to automatically detect connected IP cameras on the network.
4. If the detected IP cameras and DVR are not on the same subnet, you can modify the camera’s IP,
subnet and port settings by clicking on the next to camera’s IP address.
5. Input the camera’s password in the password field. Click the
Add
button to add the IP camera to
the
Added Cameras
list. Please note the camera’s status will show as disconnected initially.
Click the refresh button to obtain a connected status. You can also click the play icon to
verify a successful connection to the camera.
6. Once an IP camera has been added to the Added Cameras list, you may remove the camera by clicking
the Trashcan icon or view the camera by clicking the Play icon.
7. Go to
Main Menu > Recording Configuration > Recording Quality
to setup IP camera recording
resolution, frame rate, etc.
Using Internet Explorer
1. Connect to the DVR by typing the IP address in the address bar
2. Login to the DVR as above.
3. Click on
Configuration > Camera Management > IP Camera
4. Enter the camera IP Address and other appropriate information on the right side of the screen.
5. Repeat to add more cameras.