ATM Digital Video Recorder Quick Start Guide
32
Figure 3-26
Data Package Settings
Step 6
Click Apply to finish the ATM settings.
3.14 Recording Settings
Before you start
Make sure that the disk has already been installed. If not, please install a disk and initialize it. You
may refer to the user manual for detailed information.
Purpose
You can enable continuous record, or motion detection record.
After rebooting all the manual records enabled are canceled.
Step 1
On the live view window, right-click the window and move the cursor to the Start Recording
option, and select Continuous Record, or Motion Detection Record as your demand.
Figure 3-27
Start Recording from Right-click Menu
Step 2
Click Yes in the pop-up Attention message box to confirm the settings. All the channels will
start to record in the selected mode.
