DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Page
70
Total
116
Step 4: Copy to other days
You can repeat step2 and step3 to setup for other days. Also you can copy the current day to
other days.
Step 5: Save
Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters
and return main menu.
Note:
1)
If record type is “Motion Detect” or other related types, you must setup “Motion
Detection” in order to trigger motion recording (refer to chapter 5.10).
2)
If record type is “Alarm” or other related types, you must setup “Alarms” in order to
trigger alarm recording (refer to chapter 5.13).
3)
The time period is among 00:00—24:00.
5.13 External Alarm Input and Relay Output
For 2-channel DVR, there are 4 external alarm input and 2 relay output. For 4-channel DVR,
there are 5 external alarm input and 2 relay output. In “Alarms” menu, you can setup for each
external alarm input.
In main menu, move “Active Frame” to “Alarms” icon and press
【
ENTER
】
key to enter into
alarms menu:
External alarm input setup:
Step 1: Select one alarm input
Use
【
↑
】【
↓
】
keys to select one alarm input.
Step 2: Alarm type
This is sensor type. You can select “Normal Open” or “Normal Close”
according to the sensor type.
