I Series Network Video Recorder User Manual, 030117NA
71
Figure 72 Copy Schedule to Other Channels
6.3
Configuring Motion Detection Recording and Capture
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes
place, the NVR can analyze it and do many actions to handle it. Enabling motion detection function can trigger
certain channels to start recording or trigger full screen monitoring, audio warning, notify the surveillance center,
and so on. In this chapter, you can follow the steps to schedule a record triggered by the detected motion.
1.
Enter the Motion Detection interface, Menu > Recording Configuration > Motion.
Figure 73 Motion Detection
2.
Choose camera you want to configure.
3.
Check the Enable Motion Detection checkbox.
4.
Drag and draw the area for motion detection with the mouse. If you want to set motion detection for the entire
area shot by the camera, click
Full Screen
. To clear the motion detection area, click
Clear
.
5.
Click
Settings
, and the message box for channel information pops up.