I Series Network Video Recorder User Manual, 030117NA
209
Example:
Input ping 172.6.22.131 –l 1472 –f.
4.
Verify the switch is not in flow control.
NOTE:
Check the brand and model of the switch connecting the IP camera and the NVR, and
contact the switch manufacturer to check if it has a flow control function. If so, turn it down.
5.
Check if the fault is solved by Step 1 to Step 4.
1)
If it is solved, finish the process.
2)
If not, contact Hikvision tech support for further help.
•
No monitor connects to the NVR locally. When you manage the IP camera to connect with the device remotely
through a Web browser, the status displays as Connected. Then, when you connect the device to the monitor
via the VGA or HDMI interface and reboot the device, there is a black screen with the mouse cursor.
When connecting the NVR to the monitor before startup via the VGA or HDMI interface and managing the IP
camera to connect with the device locally or remotely, the status of the IP camera displays as Connect. Then,
connecting the device with CVBS, there is a black screen.
Possible Reasons
-
After connecting the IP camera to the NVR, the image is output via the main spot interface by default.
Steps
1.
Enable the output channel.
2.
Select “Menu > Configuration > Live View > View,” and select video output interface in the drop-down list
and configure the window you want to view.
NOTES:
The view settings can be configured only by local NVR operation.
Different camera orders and window-division modes can be set for different output
interfaces separately, and digits like “D1”and “D2” stand for the channel number, and “X”
means the selected window has no image output.
3.
Check if the fault is solved by the above steps.
1)
If it is solved, finish the process.
2)
If not, contact Hikvision tech support for further help.
•
Live view freezes outputting video locally.