HIKVISION DS-7608NI-I2/8P Скачать руководство пользователя страница 198

Страница: 198 / 221

I Series Network Video Recorder User Manual, 030117NA

197

permissions.

• Operator:

The

Operator

user level permissions include Two-way Audio in Remote Configuration

and all operating permissions in Camera Configuration by default.

• Guest:

A Guest user has no permission for Two-way Audio in Remote Configuration and has only

local/remote playback in the Camera Configuration by default.

• User’s MAC Address:

The MAC address of the remote PC that logs onto the NVR. If it is

configured and enabled, it allows only the remote user with this MAC address to access the NVR.

Click the

button to save the settings and go back to the User Management interface. The added

new user will be displayed on the list.

Figure 268 Added User Listed in User Management Interface

Select user from the list, then click the

button to enter the Permission settings interface.

Figure 269 User Permission Settings Interface

Set the user permissions for Local Configuration, Remote Configuration, and Camera Configuration.

Содержание DS-7608NI-I2/8P






























































































































































































































Результаты поиска

Содержание DS-7608NI-I2/8P

Отзывы:

HIKVISION DS-7608NI-I2/8P, Руководство пользователя, Страница: 198 / 221

Результаты поиска

Содержание DS-7608NI-I2/8P

Отзывы: