HIKVISION Ds-7604ni-e1, ds-7608ni-e1 Скачать руководство пользователя страница 228

Страница: 228 / 248

Network Video Recorder User Manual

227

16.2

Glossary

•

Dual Stream:

Dual stream is a technology used to record high resolution video locally while transmitting

a lower resolution stream over the network. The two streams are generated by the DVR, with the main

stream having a maximum resolution of 4CIF and the sub-stream having a maximum resolution of CIF.

•

HDD:

Acronym for Hard Disk Drive. A storage medium which stores digitally encoded data on platters

with magnetic surfaces.

•

DHCP:

Dynamic Host Configuration Protocol (DHCP) is a network application protocol used by devices

(DHCP clients) to obtain configuration information for operation in an Internet Protocol network.

•

HTTP:

Acronym for Hypertext Transfer Protocol. A protocol to transfer hypertext request and information

between servers and browsers over a network

•

PPPoE:

PPPoE, Point-to-Point Protocol over Ethernet, is a network protocol for encapsulating

Point-to-Point Protocol (PPP) frames inside Ethernet frames. It is used mainly with ADSL services where

individual users connect to the ADSL transceiver (modem) over Ethernet and in plain Metro Ethernet

networks.

•

DDNS:

Dynamic DNS is a method, protocol, or network service that provides the capability for a

networked device, such as a router or computer system using the Internet Protocol Suite, to notify a

domain name server to change, in real time (ad-hoc) the active DNS configuration of its configured

hostnames, addresses or other information stored in DNS.

•

Hybrid DVR:

A hybrid DVR is a combination of a DVR and NVR.

•

NTP:

Acronym for Network Time Protocol. A protocol designed to synchronize the clocks of computers

over a network.

•

NTSC:

Acronym for National Television System Committee. NTSC is an analog television standard used

in such countries as the United States and Japan. Each frame of anNTSC signal contains 525 scan lines at

60Hz.

•

NVR:

Acronym for Network Video Recorder. An NVR can be a PC-based or embedded system used for

centralized management and storage for IP cameras, IP Domes and other DVRs.

•

PAL:

Acronym for Phase Alternating Line. PAL is also another video standard used in broadcast

televisions systems in large parts of the world. PAL signal contains 625 scan lines at 50Hz.

•

PTZ:

Acronym for Pan, Tilt, Zoom. PTZ cameras are motor driven systems that allow the camera to pan

left and right, tilt up and down and zoom in and out.

•

USB:

Acronym for Universal Serial Bus. USB is a plug-and-play serial bus standard to interface devices to

a host computer.

Содержание Ds-7604ni-e1, ds-7608ni-e1

























































































































































































































































Результаты поиска

Содержание Ds-7604ni-e1, ds-7608ni-e1

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION Ds-7604ni-e1, ds-7608ni-e1, Руководство пользователя

Результаты поиска

Содержание Ds-7604ni-e1, ds-7608ni-e1

Отзывы:

Бренды по названию

Популярные бренды