Network Video Recorder User Manual
68
Chapter 5 Event
5.1 Normal Event Alarm
5.1.1 Configure Motion Detection Alarms
Motion detection enables the device to detect the moving objects in the monitored area and
trigger alarms.
Steps
1. Go to System → Event → Normal Event → Motion Detection.
2. Select a camera.
3. Check Enable.
4. Set the motion detection rule.
For cameras or video
recorders have
human and vehicle
detection function.
Click Draw Area to draw the detection area(s) on the preview screen.
Check Enable AI by Device if Detection Target should be analyzed by
your video recorder.
Note
If Enable AI by Device is turned on, the device engine mode should be
configured as Motion Detection 2.0.
Set Detection Target as Human or Vehicle to discard alarms which
are not triggered by human body or vehicle.
For cameras or video
recorders do not
have human and
vehicle detection
function.
Click Full screen to set the full-screen as the detection area, or drag
on the preview screen to draw the customized detection area.
5. Set Sensitivity
Sensitivity
Sensitivity ranges from 0 to 100. It allows you to calibrate how readily movement triggers the
alarm. A higher value results in the more readily to triggers motion detection.
6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set linkage actions. Refer to Configure Linkage Actions.
8. Click Apply.
Содержание DS-7600NXI-8P/S Series
Страница 1: ...Network Video Recorder User Manual ...
Страница 209: ...UD31306B ...