manualshive.com logo in svg

HIKVISION DS-7600NI-K1/4G Series, Руководство пользователя

Поделиться
Скачать
HIKVISION DS-7600NI-K1/4G Series Скачать руководство пользователя страница 43

Figure 5-15 Set Arming Schedule

3. Click Apply.

Configure Alarm Linkage Action

Alarm linkage actions will be activated when an alarm or exception occurs.
Steps

1. Click Linkage Action.

Figure 5-16 Linkage Actions

2. Set normal linkage actions, alarm output linkage actions, trigger channel, etc.

Alarm Pop-up Window

The local monitor will pop up the alarming channel image when an alarm is triggered. It

requires to select the alarming channel(s) in Trigger Channel.

Buzzer Alarm

It will trigger a buzzer beep when an alarm is triggered.

Notify Surveillance Center

The device will send an exception or alarm signal to the remote client software when an

alarm is triggered.

Send Email

It will send an email with alarm information when an alarm is triggered.

PTZ Linkage

It will trigger PTZ actions (e.g., call preset/patrol/pattern) when smart events occur.

Audio and Light Alarm Linkage

Network Video Recorder User Manual

30

Содержание DS-7600NI-K1/4G Series

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды