Installation Manual of DS-7600NI-H2/P Series
5
Chapter 3
Interface Description
3.1
Front Panel Introduction
1
2
3
Figure 3. 1
View of Front Panel
Table 3. 1
Description of Front Panel
No.
Name
Description
1
Power Button
When the device is off and the power switch in rear panel is on, press the power
button to start the device.
When the device is on, press the power button to shut down the device.
2
Status LED
Indicators
Power
Power indicator is red when the device is running and no light means the device
is shutdown.
Tx/Rx
Tx/Rx blinks in green when there is network data transmission.
HDD
HDD indicator blinks in green when hard disk writing or reading.
3
USB Ports
Universal Serial Bus (USB) 2.0 ports for additional devices such as USB mouse
and USB Hard Disk Drive (HDD).
3.2
Rear Panel Introduction
1
2
3
4
5
6
7
8
9
10 11
Figure 3. 2
Rear Panel View
Table 3. 2
Rear Panel Description
No.
Name
Description
1
LAN
1 RJ-45 10 /100 /1000 Mbps self-adaptive Ethernet interface.
2
RS-232
RS-232 interface for debugging and maintenance.