HIKVISION DS-7200HVI Скачать руководство пользователя страница 147

Страница: 147 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

146

Please refer to step 7 of

Chapter 11.1 Configuring OSD Settings

Click the

Apply

button to save the settings.

Note:

You can also click the

Restore

to restore the current OSD settings to the default parameters.

11.3 Configuring Video Parameters

Steps:

Enter the Image Settings interface.

Menu > Camera > Image

Select the camera to set image parameters.

Set the period of a day for configuring independent image parameters so as to satisfy different light

conditions, e.g., daylight and night time. Two periods can be configured. When you have configured Period 1,

the Period 2 is remained as the

Other Time

Figure 11.5 Image Settings Interface

Select the mode from the drop-down menu according to different light conditions.

Four modes are selectable:



Standard

: in general lighting conditions (default).



Indoor:

the image is relatively smoother.



Dim Light:

the image is smoother than the other three modes.



Outdoor:

the image is relatively clearer and sharper. The degree of contrast and saturation is high.

Adjust the image parameters including the brightness, contrast, saturation, hue and sharpness by moving the

sliding bar or increasing/decreasing the value.

Note:

The adjustable value range for the brightness, contrast, saturation and hue is 0~ 255 and for the

sharpness is 0~ 15.

You can click the

Copy

button to copy the image settings of the current camera to other cameras. Please

refer to step 7 of

Chapter 11.1 Configuring OSD Settings

On the Image Settings interface, click the

Apply

button to save the settings.

Note:

you can click the

Restore

button to restore the current image settings to default parameters.

alarm shop

Содержание DS-7200HVI












































































































































































Результаты поиска

Содержание DS-7200HVI

Отзывы:

HIKVISION DS-7200HVI, Руководство пользователя, Страница: 147 / 171

Результаты поиска

Содержание DS-7200HVI

Отзывы: