HIKVISION DS-7200-SH Скачать руководство пользователя страница 9

Страница: 9 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

and iSCSI are supported.



TCP, UDP and RTP for unicast.



Remote search, playback, download, locking and unlocking of the record files, and downloading

files broken transfer resume.



Remote parameters setup; remote import/export of device parameters.



Remote viewing of the device status, system logs and alarm status.



Remote locking and unlocking of control panel and mouse.



Remote HDD formatting and program upgrading.



Remote system restart.



RS-232 and RS-485 transparent channel transmission.

Note:

RS-232 serial port is provided for DS-7300-SH and DS-8100-SH models only.



Alarm event and exception information can be sent to the remote host.



Remotely start/stop recording.



Upgrade by remote FTP server.



Remote PTZ control.



Two-way audio and voice broadcasting.



Embedded WEB server.

Development Scalability:



SDK for Windows and Linux system.



Source code of application software for demo.



Development support and training for application system.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 9 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: