HIKVISION DS-7200-SH Скачать руководство пользователя страница 82

Страница: 82 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

Choose a record file you want to play back.

If there is only one channel in the search result, clicking

button takes you to Full-screen Playback

interface of this channel.

If more than one channel is optional, clicking

button takes you to step 3 and step 4.

Figure 6.11 Result of Normal Video Search

Choose channels for simultaneous playback.

Note:

Optional channels for simultaneous playback are the same as the channels chosen to search record

files in step 1. And the channel with the recorded file selected in step 2 is the main channel during

multi-channel playback and it is displayed at the upper left corner.

Figure 6.12 Select Channels for Synchronous Playback

Synchronous Playback interface.

The toolbar in the bottom part of Playback interface can be used to control playing process.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 82 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: