HIKVISION DS-7200-SH Скачать руководство пользователя страница 73

Страница: 73 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

Note:

The record files of which the recording is still not completed can’t be locked.

Click

to change it as

to unlock the file and the file is not protected.

Figure 5.37 Unlocking Attention

Protect file by setting HDD property to Read-only

Note:

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter 10.3

、、

Managing HDD Group.

Steps:

Enter HDD setting interface.

Menu> HDD

Figure 5.38 HDD General

Click

to edit the HDD you want to protect.

Figure 5.39 HDD General- Editing

Set the HDD to Read-only.

Click

to save settings and back to the upper level menu.

Note:

You can’t save any files in a Read-only HDD. If you want to save files in the HDD, change the

property to R/W.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 73 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: