HIKVISION DS-7200-SH Скачать руководство пользователя страница 71

Страница: 71 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

5.8 Configuring HDD Group for Record

Purpose:

You can group the HDDs and save the record files in certain HDD group.

Steps:

Enter HDD setting interface.

Menu>HDD

Figure 5.33 HDD-General

Select

Advanced

on the left bar.

Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,

please refer to

Chapter 10.3 Managing HDD Group

Select

General

in the left bar.

Click

to enter editing interface.

Configuring HDD group.

1) Choose a group number for the HDD group.

2) Click

Apply

and then in the pop-up message box, click

Yes

to save your settings.

3) Click

to back to the upper level menu.

Repeat the above steps3-4 to configure more HDD groups.

Choose the Channels which you want to save the record files in the HDD group.

1) Select

Advanced

on the left bar.

Figure 5.34 HDD-Advanced

2) Choose Group number in the dropdown list of

Record on HDD Group.

3) Check the channels you want to save in this group.

4) Click

Apply

to save settings.

Note:

After having configured the HDD groups, you can configure the Recording settings

following the procedure provided in

Chapter 5.2-5.6

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 71 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: