HIKVISION DS-7200-SH Скачать руководство пользователя страница 69

Страница: 69 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

5.7 Configuring Redundant Record

Purpose:

Enabling redundant recording, which means saving the record files not only in the R/W (read/write) HDD but

also in the redundant HDD, will effectively enhance the data safety and reliability.

Note:

You must set the Storage mode in the HDD advanced settings to Group before you set the HDD

property to Redundant. For detailed information, please refer to

Chapter 10.4 Managing HDD Group

. There

should be at least another HDD (NetHDD) which is in R/W mode.

Steps:

Enter HDD Information interface.

Menu> HDD

Figure 5.30 HDD General

Select the

HDD

and click

to enter the Local HDD Settings interface.

1) Set the HDD property to Redundant.

Figure 5.31 HDD General-Editing

2) Click

Apply

to save the settings.

3) Click

to back to the upper level menu.

Enter the Record setting interface.

Menu> Record> Encoding

Select

Record.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 69 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: