HIKVISION DS-7200-SH Скачать руководство пользователя страница 60

Страница: 60 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

Task 2: Draw the Schedule

Steps:

1) Click the icon on the right to select a record type. Different recording types are available for

different models.

DS-7204/7208/7216 –SH, DS-7200-SV and DS-7200HWI-SL: Normal and Motion.

DS-7224/7232–SH, DS-7300-SH and DS-8100-SH: Normal, Motion, Alarm, Motion/Alarm and

Motion & Alarm.

Note:

To enable Motion triggered recording, you must configure the motion detection settings. For

detailed information, refer to

Chapter 8.1

and

Chapter 8.2

2) Use the mouse to drag and draw time periods.

Note:

Up to 8 periods can be configured for each day.

Figure 5. 10 Draw the Schedule

3) You can repeat the above steps to set schedule for other channels. If the settings can also be used to

other channels, click

Copy

to enter the Copy Camera interface and then choose the channel to

which you want to copy.

Figure 5.11 Copy Schedule to Other Channels

4) Click

Apply

in the Record Schedule interface to save the settings.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 60 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: