HIKVISION DS-7200-SH Скачать руководство пользователя страница 57

Страница: 57 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

•

Expired Time (day):

The expired time is the longest time for a record file to be kept in the

HDD, if the deadline is reached, the file will be deleted. You can set the expired time to 0, and

then the file will not be deleted. The actual keeping time for the file should be determined by

the capacity of the HDD.

•

Redundant Record:

Enabling redundant record means you save the record files in the

redundant HDD. See

Chapter 5.8 Configuring Redundant Record

otes:

1. The

Redundant Record

option is only available when the HDD mode is

Group.

2. The redundant record is used when you want to save the record files in the redundant HDD.

You must configure the redundant HDD in HDD settings. For detailed information, see

Chapter 10.3.2 Setting HDD Property

•

Record Audio:

Check the checkbox to record the sound, or uncheck to record the image

without sound.

•

Enable 960Mode:

Enable the encoding at WD1 (PAL: 960×576, NTSC: 960×480) resolution.

You can also uncheck the checkbox to disable it.

Note:

This feature is available for DS-7204HWI-SV, DS-7224/7232HVI-SH,

DS-7200HWI-SH, DS-7200HVI-SV, DS-7200HWI-SL, DS-7300HWI-SH, DS-7300HI-SH,

DS-8100HCI-SH and DS-8100HWSI-SH models only.

If you want to copy the current main stream settings to other camera (s), click

Copy

to enter the

Copy Camera interface. Select the camera (s) and click

to finish the copy settings.

Figure 5.4 Copy Camera Settings

On the Record settings interface, click

Apply

to save the settings.

Note:

You can click the

Restore

button to restore the current main stream settings to the default

parameters.

Set encoding parameters for sub-stream

Click the

Substream

tab to enter the Substream settings interface.

Figure 5.5 Encoding Parameters-Sub-stream

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 57 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: