HIKVISION DS-7200-SH Скачать руководство пользователя страница 42

Страница: 42 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

Note:

The Spot Output 1 is provided for DS-7300-SH and DS-8100-SH models.

•

Full Screen Monitoring Dwell Time:

The time in seconds to show alarm event screen.

Setting Camera Order

Figure 3.8 Live View- Camera Order

To set the camera order:

Click the

View

tab to enter the camera order settings interface.

Select an output interface and select a screen layout.

Click to select a screen in the right region and double-click to select a channel in the left region.

Thus the selected channel will be displayed in the corresponding screen.

Note:

means the channel will not be displayed.

You can click

to start live view of all channels and click

to stop live view of all channels.

Click

to go to the previous or next page.

Click the

Apply

button to save the setting.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 42 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: