HIKVISION DS-7200-SH Скачать руководство пользователя страница 40

Страница: 40 / 188

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR

Figure 3.5 Image Settings

Adjust the image parameters including the brightness, contrast, saturation, hue, sharpness level and

denoising level by moving the sliding bar or increasing/decreasing the value.

Note:

The adjustable value range is 0~255 for the brightness, contrast, saturation and hue, 0~15 for the

sharpness level and 0~5 for the denoising level.

Copy image parameters.

If you want to copy the image parameters of the current camera to other camera (s), click the

Copy

button to enter the

Copy to

interface:

Figure 3.6 Copy Image Settings to Other Camera (s)

Select the camera (s) to be configured with the image settings. You can also click the checkbox of

Analog to select all cameras.

Click the

button to finish the Copy settings.

Note:

You can click the

Restore

button to restore the current image settings to default parameters.

Содержание DS-7200-SH





























































































































































































Результаты поиска

Содержание DS-7200-SH

Отзывы:

HIKVISION DS-7200-SH, Руководство пользователя, Страница: 40 / 188

Результаты поиска

Содержание DS-7200-SH

Отзывы: